HS820 advanced fast dry glass glue for fast glue
Product characteristics:
1, HS-520 is one component, neutral, room temperature curing silicone sealant, easy to use, fast curing speed.
2, with excellent weathering resistance and long service life.
3, the majority of building materials without corrosion, for a variety of building materials have good bonding performance.
4, have a variety of colors, can also provide other colors of user requirements, see the specific color card, contact the seller
Main purposes:
1, all kinds of doors and windows;
2, all kinds of decorative glass sealing adhesive seal component;
3, suitable for professionals of general purpose sealing.
Abstract: the construction of
1, to ensure that the sealant has good adhesion, surface of the building materials in construction and sealant contact must be to clean, dry, there shall be no water, dust, oil, pre construction deal with building materials surface cleaning;
2, cleaning must use white cotton cloth clean cashmere and scouring of the solvent, the solvent can be used toluene or acetone;
3, first with a piece of white cloth on the solvent wipe the surface of the building materials, then immediately use a dry cloth wipe solvent building surface;
4. After cleaning the building surface must be constructed within an hour, before construction to keep the surface clean and dry, avoid secondary pollution;
5, using a manual or pneumatic glue injection gun the mortar to fill the seams, then with a scraper further inward extruding and mortar completely fill the seams, without leaving gaps.
6, to ensure that the silicone sealant surrounding lines and beautiful, neat, in the area near the interface used tape to cover, but do not tape contact will be construction sealant surface. After the completion of the repair work should be immediately removed the cover tape.
Application limit:
1, can not be used structural adhesive;
2, before sizing after the mortar is solidified, should not be completely isolated from the air;
3, grease, increase building surface should not be plasticizer and other liquid organic compounds;
4, long buried in the soil of the interface and long-term water immersion occasions should not be used
Note:
1, sealant curing process will release the volatile compounds, please pay attention to keep the work place good ventilation.
2, for curing the sealant is not suitable for a long time direct contact with the skin, such as accidentally enter the eyes, should immediately rinse with plenty of water, if necessary, please check the doctor.
3, after curing the sealant will not release harmful substances, it will not damage the skin.
4, if accidentally swallowed sealant, should immediately see a doctor.
high speed, quick drying, galss glue, rapid, fast.
