2016 Cheap M2-M36 Threadlockers Super glue 222 242 243 262 263 271 277 290 Adhesives Glue
Our Top quality Glue Widely used in mobile communications equipment, computers, automobiles, aircraft, vacuum cleaners, audio, medical devices, cosmetics, computer, disk drive, HDD, handicraft and consumer electronics!!! With the MSDS file.
Products Features:
Product Number | Container(ml) | Color | Viscosity (mPa.s) | Prevail torque (N.m) | Break torque (N.M) | Gap fill (mm) | Temperature range (°C) | Fixture time/ Full cure time |
222 | 10/50/250 | Purple | 1200/5000 Thixotropic | 4.0 | 6 | 0.13 | -50—150 | 20min/24hrs |
242 | 10/50/250 | Blue | 1200/6000 Thixotropic | 4.8 | 12 | 0.13 | -50—150 | 20min/24hrs |
243 | 10/50/250 | Blue | 2250/8000 Thixotropic | 7.0 | 20 | 0.13 | -50—150 | 20min/24hrs |
262 | 10/50/250 | Red | 1800/5000 Thixotropic | 22 | 22 | 0.13 | -50—150 | 20min/24hrs |
271 | 10/50/250 | Red | 500 | 31 | 25 | 0.13 | -50—150 | 20min/24hrs |
272 | 10/50/250 | Red | 6000 | 25 | 23 | 0.25 | -50—230 | 30min/24hrs |
277 | 10/50/250 | Red | 7000 | 32 | 32 | 0.25 | -50—150 | 30min/24hrs |
290 | 10/50/250 | Green | 12 | 29 | 10 | 0.10 | -50—150 | 20min/24hrs |
222 thread locking agent low strength, thixotropic viscosity
Suitable for most metal surfaces, common tools available demolition. For M2-M12 thread locking and sealing. Applied to the fastener diameter of 1/4 "(6mm) or less ideal, with some lubrication in order to achieve accurate clamping load.
242 strength thread locking agent
General purpose, thixotropic viscosity. Lock for M6-M20 threads solid sealing. It is a common tool available removable thread locking agent. It has some lubricity for accurate clamp loads.
243 thread locking agent resistance to oil / medium intensity
Fast curing, can be used for inert surface, good oil content. Easy to disassemble and can be used on the working surface of the minor oil contamination. For precoating agent Dri-Loc bolt disassembly after re-locking time. It can be used for M20 the following thread locking and sealing.
262 thread locking agent in high intensity
Suitable for most metal surfaces. Thixotropic viscosity, good chemical resistance. For M20 the following thread locking and sealing. Is a permanent locking thread locking agent, in extreme chemical / environmental conditions have excellent rust and corrosion resistance.
263 high strength thread locking agent
With high temperature resistance and oil resistance, for active metal and an inert substrate, viscosity: 400 / 600cP, curing time: 5 minutes early solid Full - 24 hours
270 high strength thread locking agent
Suitable for most metal surfaces. Thixotropic viscosity, chemical resistance, is a permanent locking thread locking agent, in extreme chemical / environmental conditions have excellent rust and corrosion resistance.
271 thread locking agent high temperature / high strength
High temperature of 230 ℃. It can be used for cylinder head stud thread locking. For most surface provides rapid cure including fasteners not as prepared surface. Recommended for 1.5 "(36mm) diameter bolt or less. When you unpack be heated and tools.
272 thread locking agent high temperature / high strength
High temperature of 230 ° C. It can be used for cylinder head stud thread locking. For most surface provides fast curing comprises uncleaned fasteners. Recommended for 1.5 "(36m) diameter bolt or less. When you unpack be heated and tools.
277 high strength thread locking agent
High viscosity. Excellent chemical resistance. M36 thread for permanent locking and sealing. Prevents rust andcorrosion thread, with heating and tools apart.
290 thread locking agent penetration level
Medium strength, low viscosity, fast curing. It has been assembled for M2-M12 thread locking and sealing. Can also be used to seal welds, castings trachoma (¢ 0.10mm or less) micropores. Prevent thread rust and corrosion, local heating and tool takes apart.
Product Storage informations:
1. Storage Store product in the unopened container in a dry location. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties)
2. Storage Store product in the unopened container in a dry location. Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties.)
3. After the glue is removed from the container during use, may be contaminated, do not return it to its original container!)
Attentions:
(1)Keep out of reach of children
(2)The product consists of a-cyanoacrylate which is harmful to skin and eyes.
(3)If contact with eyes and skin, immediately flush with plenty of water and seek medical advice
(4)After using, please clean the excess adhesive around the nozzle and tighten it well.
ACMEEN Technology Co., Ltd.
Established in 2009, our company specialized in the production of hardware fasteners,molding parts, and other small hardware. We also supply plastic products, including DIY products such as roller,sheet wheel made from PU, PP, PTEF, and So on.
Aiming at top quality, excellent service and supreme credit, we always supply products on the principle of "of the same quality but at a low price, at the same price but of the best quality." With this tenet, our products are able to meet international quality standards, which is why most of them are shipped to America, Europe, Southeast Asia, and other regions.
We can also produce according to clients' requirements, so contact us right now to see how we can meet your demands!
| Why our company ? | |
| Quick Response | Your Enquiry will be replied within 24 hours. |
| High Quality | In the industry there are more than Six years of experience. |
| Competitive Price | Directly from the factory to save your money. |
| Short Lead Time | Being efficient:3-7 days for samples and 10-35 days for bulk quantity orders. |
| Flexibility | Small orders are acceptable for quick delivery and to help you reduce stock cost. |
| OEM | Custom fabrication according to your drawings ,samples or designs. |
Have any questions,please do not hesitate to contact us ,thanks
Contact : Summer
Skype ID:Acmeen-Summer
Phone/Whatsapp/Viber:+86
