Advantages:
1. Super bonding power, avoid the hollow caused by ceramic tile which contacted with cement;
2. Stable performance, use directly after mix it with water;
3. Strong water retention capacity, no need to soak the tile or wet the wall. Reduce the dosage of adhesive and the load on the building;
4. Good flexibility, resistant to all kinds of impact;
5. Nontoxic, non-radiant, no irritative odor;
6. Special anti-sagging formula, easier application.
Application Instructions:
1. Surface Preparation:
·The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.
·The new cement mortar surface should be maintained at least 14 days before the application of the adhesive.
2. Application Method:
·Mix the powder with water at the ratio of 25:6-6.5, and then use electrical blender to stir evenly.
·Keep the mixture for 5 to 10 minutes, and then stir it again to achieve the best result.
·Finally apply the adhesive on the surface with the notched scraper, and then put the ceramic tile on the surface and press.
·Mixing Ratio (powder: water): 25: (6-6.5)
·Application Tool: electrical blender, notched scraper(3X3mm, 4X4mm, 6X6mm, 8X8mm, 10x10mm), horizontal ruler etc.